Blacksmithing A Sculpture
€1.00
Artist, sculptor and blacksmith Anna Sigríður Sigurjónsdóttir welds steel on basalt (lava) in her workshop in South Iceland. https://annasigridur.is/home/
Description : Artist, sculptor and blacksmith Anna Sigríður Sigurjónsdóttir welds steel on basalt (lava) in her workshop in South Iceland.
Number of Files : 14
Total Audio Time : 15 minutes 19 secs
Type : WAV Stereo
Sample Rate / Bit Rate : 192 kHz / 24 Bit
Normalised : No
Looped Files : No
Single Shot Files : Yes
Size : 1.09 GB
Metadata : Files
Number of Files : 14
Total Audio Time : 15 minutes 19 secs
Type : WAV Stereo
Sample Rate / Bit Rate : 192 kHz / 24 Bit
Normalised : No
Looped Files : No
Single Shot Files : Yes
Size : 1.09 GB
Metadata : Files
Description : Artist, sculptor and blacksmith Anna Sigríður Sigurjónsdóttir welds steel on basalt (lava) in her workshop in South Iceland.
Number of Files : 14
Total Audio Time : 15 minutes 19 secs
Type : WAV Stereo
Sample Rate / Bit Rate : 192 kHz / 24 Bit
Normalised : No
Looped Files : No
Single Shot Files : Yes
Size : 1.09 GB
Metadata : Files are stamped with UCS compliant metadata in Soundminer
Documentation Included : Copyright, EULA, Images, Metadata
License : Single user, non attribution, royalty free
Recorder : Sound Devices Mix Pre 10II
Microphones : Sennheiser MKH 8040’s
Microphone Configuration : ORTF
ABOUT THESE AUDIO FILES
These recordings are as close to their original recorded state as possible.
On occasions some recordings might have minimal repair work using Izotope RX advanced. Also on occasion I may use an EQ to roll off any unwanted bottom end frequencies or top end frequencies to remove hiss if present.
LISTENING LEVELS
These are ambient recordings, intended for use as atmospheric background audio in your project, so it is recommended that you listen to them on a low to medium level on good quality headphones or speakers.
Raising the volume level too high may reveal a small amount of hiss in the recording as a consequence of making the noise floor in the recording more audible.
IMPORTANT : In these recordings there may be some periods of quiet audio and some moments of contrasting loud peaks, so please keep this in mind before cranking up your speakers (or even worse, your headphones).
KEYWORDS : Basalt, Blacksmith, Burn, Buzz, Crackle, Extractor Fan, Fizz, Flash, Glitch, Hum, Lava, Melt, Sculpture, Small Workshop, Spark, Steel, Volcanic, Weld, Welding Torch
FXNAME : Blacksmith, Design Source, Industrial ambience, Spells and Sparkles
Number of Files : 14
Total Audio Time : 15 minutes 19 secs
Type : WAV Stereo
Sample Rate / Bit Rate : 192 kHz / 24 Bit
Normalised : No
Looped Files : No
Single Shot Files : Yes
Size : 1.09 GB
Metadata : Files are stamped with UCS compliant metadata in Soundminer
Documentation Included : Copyright, EULA, Images, Metadata
License : Single user, non attribution, royalty free
Recorder : Sound Devices Mix Pre 10II
Microphones : Sennheiser MKH 8040’s
Microphone Configuration : ORTF
ABOUT THESE AUDIO FILES
These recordings are as close to their original recorded state as possible.
On occasions some recordings might have minimal repair work using Izotope RX advanced. Also on occasion I may use an EQ to roll off any unwanted bottom end frequencies or top end frequencies to remove hiss if present.
LISTENING LEVELS
These are ambient recordings, intended for use as atmospheric background audio in your project, so it is recommended that you listen to them on a low to medium level on good quality headphones or speakers.
Raising the volume level too high may reveal a small amount of hiss in the recording as a consequence of making the noise floor in the recording more audible.
IMPORTANT : In these recordings there may be some periods of quiet audio and some moments of contrasting loud peaks, so please keep this in mind before cranking up your speakers (or even worse, your headphones).
KEYWORDS : Basalt, Blacksmith, Burn, Buzz, Crackle, Extractor Fan, Fizz, Flash, Glitch, Hum, Lava, Melt, Sculpture, Small Workshop, Spark, Steel, Volcanic, Weld, Welding Torch
FXNAME : Blacksmith, Design Source, Industrial ambience, Spells and Sparkles
-
0:00/0:51
-
0:00/0:36
-
0:00/0:34
-
0:00/0:43
-
0:00/0:52
-
0:00/0:55
-
0:00/0:49
-
0:00/1:02
-
0:00/1:23
-
0:00/1:33
-
0:00/1:48
-
0:00/1:20
-
0:00/2:10
-
0:00/0:36
INFO
Number of Files : 14
Total Audio Time : 15 minutes 19 secs
Type : WAV Stereo
Sample Rate / Bit Rate : 192 kHz / 24 Bit
Normalised : No
Looped Files : No
Single Shot Files : Yes
Size : 1.09 GB
Metadata : Files are stamped with UCS compliant metadata in Soundminer
Documentation Included : Copyright, EULA, Images, Metadata
License : Single user, non attribution, royalty free
Recorder : Sound Devices Mix Pre 10II
Microphones : Sennheiser MKH 8040’s
Microphone Configuration : ORTF
ABOUT THESE AUDIO FILES
These recordings are as close to their original recorded state as possible.
On occasions some recordings might have minimal repair work using Izotope RX advanced. Also on occasion I may use an EQ to roll off any unwanted bottom end frequencies or top end frequencies to remove hiss if present.
LISTENING LEVELS
These are ambient recordings, intended for use as atmospheric background audio in your project, so it is recommended that you listen to them on a low to medium level on good quality headphones or speakers.
Raising the volume level too high may reveal a small amount of hiss in the recording as a consequence of making the noise floor in the recording more audible.
IMPORTANT : In these recordings there may be some periods of quiet audio and some moments of contrasting loud peaks, so please keep this in mind before cranking up your speakers (or even worse, your headphones).
KEYWORDS : Basalt, Blacksmith, Burn, Buzz, Crackle, Extractor Fan, Fizz, Flash, Glitch, Hum, Lava, Melt, Sculpture, Small Workshop, Spark, Steel, Volcanic, Weld, Welding Torch
FXNAME : Blacksmith, Design Source, Industrial ambience, Spells and Sparkles